Return
Print
Email
![PFERD M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank](/vendors/6924/large/pos-rbu-7510-6-35-sic-80-universal-ohne-ve-rgb.png "PFERD M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank")
PFERD M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank
Call For Price
- Part Number: 43740002
- UPC: 04007220398050
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Platstic filaments are temperature-resistant up to 410°F.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Abrasive Brushes
Category Level 4:
Wire Wheel Brushes
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Roughening
Applications 3:
Structuring (matt finishing, brush matting and satin finishing)
Country of Origin:
CN
Diameter External (In):
3
Diameter Filament Material (In):
0.04
Diameter Shank:
1/4 Inch
Drive Types:
Flexible shaft drive
Drive Types 1:
Power drill
Drive Types 2:
Straight grinder
EAN:
4007220398050
EDP:
763841
Filament Material:
Silicon carbide (SiC)
Grit Size:
120
Item Quantity:
5
Item Weight (kgs):
0.096
MANUFACTURER_TYPE_DESCR:
POS RBU 7510/6,35 SIC 120 Universal
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Bronze
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Thermoplastics
Materials that can be worked 12:
Wood
Materials that can be worked 2:
Cast iron
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Thermosetting plastics
Materials that can be worked 6:
Other non-ferrous metals
Materials that can be worked 7:
Stainless steel (INOX)
Materials that can be worked 8:
Steel, cast steel
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Mounting System:
Shank
Order Quanityt:
20
Packaging:
POS packaging
Prop 65:
View
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
For best performance, use a power tool with a minimum output of 300 watts.
Rpm, Max.:
4500
Rpm, Optimum, From:
1500
Rpm, Optimum, To (Rpm):
4500
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Trim Length (In):
3/4
UNSPNC:
27111907
Other Details
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Highly flexible, enabling optimal adaptation to the workpiece contour.
Packaged for retail.
Copyright © 2018 CCS Industrials. All Rights Reserved. Powered by 
Shipping charges TBD…You will be contacted to confirm your order and credit card information.
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply