Return
Print
Email
![PFERD COMBIDISC® Unitized Disc, 2" Dia, Type CD, Fine, Medium-Hard, 6AF,Aluminum oxide](/vendors/6924/large/cd-pner-mh-5006-a-f-kombi-rgb.png "PFERD COMBIDISC® Unitized Disc, 2" Dia, Type CD, Fine, Medium-Hard, 6AF,Aluminum oxide")
PFERD COMBIDISC® Unitized Disc, 2" Dia, Type CD, Fine, Medium-Hard, 6AF,Aluminum oxide
Call For Price
- Part Number: 42759102
- UPC: 04007220832806
- Availability:
Quantity:
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Product Overview
Info & Guides
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Ideal for small and medium-sized surfaces on stainless steel (INOX) components. The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.
Specifications
Details
Industrial Category:
Abrasives
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Industrial Subtype:
Sanding Discs and Kits
Category Level 4:
Quick Change Discs
Abrasive:
Aluminium oxide A
Applications:
Cleaning
Applications 1:
Deburring
Applications 2:
Step-by-step fine grinding
Applications 3:
Roughening
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Applications 5:
Surface work
Applications 6:
Work on weld seams
Clamping System:
CD system
Country of Origin:
IT
Diameter External (In):
2.00
Drive Types:
Angle grinder
Drive Types 1:
Cordless angle grinder
Drive Types 2:
Flexible shaft drive
Drive Types 3:
Straight grinder
EAN:
4007220832806
EDP:
48435
Grit Size:
F (fine)
Item Quantity:
25
Item Weight (kgs):
0.012
MANUFACTURER_TYPE_DESCR:
CD PNER-MH 5006 A F
Materials that can be worked:
Aluminum
Materials that can be worked 1:
Brass
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Thermoplastics
Materials that can be worked 13:
Titanium
Materials that can be worked 14:
Titanium alloys
Materials that can be worked 2:
Bronze
Materials that can be worked 3:
Cast steel
Materials that can be worked 4:
Cobalt-based alloys
Materials that can be worked 5:
Copper
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Stainless steel (INOX)
Order Quanityt:
30
Pferdefficiency:
PFERDEFFICIENCY recommends COMBIDISC® products to reduce disc change and setup times.
Pferdergonomics:
PFERDERGONOMICS recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.
Prop 65:
View
Recommendations for use:
Use COMBIDISC® non-woven discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
Recommendations for use 1:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Safety notes:
The maximum permitted peripheral speed is 9,800 SFPM.
UNSPNC:
31191506
UPC Code:
97758484350
Version:
MH (medium-hard)
Other Details
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.
Reduced down time due to quick changes.
Copyright © 2018 CCS Industrials. All Rights Reserved. Powered by 
Shipping charges TBD…You will be contacted to confirm your order and credit card information.
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply
Thank you for your business.
Contact CCS for volume discounts on your order.
Freight charges from Canada will apply